Cleaning the Water Tank

1. Prepare a cleaning solution: Use a diluted citric acid solution or white vinegar mixed with water
2. Soak the reservoir: Remove the water tank and soak it in the cleaning solution for 30 minutes, then rinse thoroughly
3. Empty the cleaning solution: Rinse the tank with clean, fresh water
4. Air dry: Allow the reservoir to air dry completely before reassembling or refilling

Important Cleaning Warnings

1. Do not use chemical cleaners or abrasive products
2. Do not use water hotter than 122°F (50°C)
3. Do not use salty or carbonated liquids

Battery Charging & Storage

1. Recharge the device using the included USB charging cable as soon as the battery is low
2. Always unplug the charging cable before using or cleaning the device
3. When not in use, store the mister in a dry, cool, and temperate place

Safety Instructions

1. Keep the device away from heat sources and avoid direct sunlight
2. Ensure the voltage indicated on the technical label matches your local power supply before charging
3. Do not use or store the device in a humid environment while connected to power
4. Never immerse the device in water or any other liquid
5. Always disconnect the charging cable before cleaning or operating the device

1. The USB port is damaged
2. The device has malfunctioned
3. The device has been dropped or damaged in any way
4. Electrical repairs must be performed only by qualified personnel
5. Improper repairs may result in serious safety risks
6. Close supervision is required when the device is used near children
7. Never allow children to handle the device